Most households in India have invested in the best window AC 1 ton to suit their needs. If you too have a window AC at home, it is likely you want to learn how to clean it. This helps you ensure your AC is in top condition for a long time. We have put together all the necessary information you require to clean your AC, for you to do it all by yourself at home, saving you money and time!
It is recommended that the equipment be disassembled in such a way that the coils can be accessed with the water jet. On both sides, we need to be able to pass water in both directions while cleaning them, and we need access to the turbine or blower so that no dirt particles end up on the air-driven blades.
Cover the motor shaft in the part where the bearings are located so that water does not enter and displace the grease inside. This can help prevent them from breaking down after maintenance. If it is digital, disconnect and remove the electronic part. If you do not know how it is connected, it is recommended to take a photo (with your phone) before disconnecting to remember how it is connected later. Before you begin cleaning the AC, remember that if you do not know how it is connected, it is recommended to take a photo (with your phone) before disconnecting.
After you’ve arranged everything, it’s critical not to direct the water jet straight at the coil in a secure manner. If not, open it in the shape of a palm to avoid bending the aluminium sheets that make up the structure. If you’re going to use a cleaning liquid that isn’t a strong chemical and don’t want to leave it on for too long, just place it and remove it with plenty of water in less than 2 minutes so that there are no chemicals residues.
Before beginning this task, we should always have a thorough understanding of how to clean a window air conditioner in order to avoid causing damage to the equipment, either through improper cleaning or inadequate maintenance procedures.
Why is it necessary to clean an air conditioner?
Avoid clogging the coils, honeycombs, or hive, as they’re known in your area. Cleaning the air conditioning system is required. The presence of a typical refrigeration cycle assures optimal functioning and performance and extends the compressor’s usable life by allowing it to work with the proper refrigerant gas pressures.
Things to Ensure Before Cleaning
Keep the below in mind before you begin cleaning
- The force of the water (preferably a high-pressure washer).
- Have plenty of water handy.
- Screwdrivers that are appropriate for the screw type.
- A blower (not essential).
- A person who can assist in disassembling the equipment is preferred.
- Liquid for cleaning (not abrasive).
- Terminals and pliers (if there is an overheated terminal).
- The liquid penetrates (if the screws are very rusty and stiff).
Which portions of the air conditioner’s body should be kept dry?
If it’s a digital card, it’s an electronic card (preferably withdraw it)—hubs for fan motors (do not direct the jet directly).
Coil of the fan motor (if the engine is not sealed).
Because most chemicals are activated by heat and decay quickly, I always advise against applying them to the condenser coil.
What parts of the machine need to be cleaned?
- Coil of the Evaporator: It’s a good idea to clean all sides, both inside and out. It uses the palm-shaped water jet to avoid bending the aluminum fins.
- Coil of the Condenser: It should be cleaned in the same manner as the evaporator. In this situation, I’ll emphasize that the area on the side where the blade is typically omitted, and its cleaning is critical. To prevent the equipment from overheating and causing damage to the compressor and poor performance.
- Blower or Turbine: By carefully inspecting your paddles, you can ensure that this element is very clean. To avoid them becoming clogged with dirt, a reduced amount of air output leads the air conditioning system to malfunction by allowing it to freeze.
- Walls for the Base: Avoid the growth of fungus and the unpleasant odor it produces. Cleaning the air conditioning unit’s base and walls are advised.
- pan for draining
- Cleaning is another area that is often overlooked, but it is critical. To avoid the collection of filth that stops the water from draining correctly and spilling onto areas of the equipment that should be dry.
- There are air conditioning types with the drain carved on the base. To avoid leaking water, it will be required to ensure that it is clean.
- Electrical Components: They can be washed and dried if they are not digital. You can also clean with a brush and a cloth. However, it is always good to clean them and check for overheated or damaged terminals. Replacing them before they get entirely damaged is a good idea.
- Cleaning and Drying: When performing maintenance on air conditioning equipment, it is recommended that you use a fan to dry it off. If you don’t have one, drain the equipment and dry it by hand with an absorbent cloth before leaving it in the sun to dry completely. As a result, we avoid soaking the area where the equipment is situated and prevent shorts caused by excessive humidity.
How often should you clean your air conditioner?
The frequency of air conditioning system maintenance is determined by the time we use it. After six months of use, we can see that the honeycomb or coil is dusty, and the force with which it expels the air has lessened. If the gadget is only switched on at night, it can last anywhere from 6 to 12 months, depending on the amount of dust in the atmosphere.